UNIVERSAL FLOOR MASTER EPOXY FOOD GRADE PRIMER is a two-component surface preparation product, solvent base protective primer designed for food grade manufacturing applications and tank linings.  Is a base coat for the Universal Floor Master Epoxy Food Grade system.

·         Non-Toxic Formulation

·         Excellent Adhesion

·         Chemical Resistant

Best for:
Concrete and metal

Sheen: Flat

Coverage: 20-25 sqm/gal

Available sizes: 4 liters

Application: by brush or roller

Mixing Ratio 3:1 by volume

Part A – 3 parts

Part B -- 1 part

Mix well and allow 15 minutes induction time

Universal Floor Master Epoxy Food Grade System

Primer - UFM Epoxy Food Grade Primer

Topcoat - UFM Epoxy Food Grade Topcoat

Reducer - UFM Epoxy Food Grade Reducer

Painting Guide:

Concrete

New or unpainted surface

·         Remove dirt, dust, grit, loose mortar, oil, grease, and other contaminants.  New concrete must be cured at least 28 days or at manufacturers recommendation before paint application.

·         Wipe clean the surface before paint application

Old or previously painted surface

·         Remove all loose, peeling, chalking or blistering paint, dirt, dust, grease, oil, and other contaminants. 

·         Treat mold or fungus infestation with bleaching solution (1 part bleach and 3 parts water)

·         Wipe clean the surface before paint application

Metal

New or unpainted surface

·         Ensure that the metal surface is free from oil, grease, rust and, other surface contaminants.

·         Remove thick rust by sand blasting and thin rust by wire brushing, sanding, or scraping. 

·         Wipe clean the surface before paint application

Old or previously painted surface

·         Remove all loose, peeling, chalking or blistering paint, dirt, dust, grease, oil, and other contaminants wire brushing or scraping.

·         Wipe clean the surface before paint application

Application:

Concrete Floor

·         1st coat - Universal Floor Master Deep Penetrating Sealer.

·         Allow 4 hours drying time.

·         2nd coat – Universal Floor Master Epoxy Food Grade Primer.

·         Allow 4 hours drying time then sand lightly and dust-off.

·         3rd – 4th – Universal Floor Master Epoxy Food Grade Topcoat.

·         Allow 8 hours intercoat interval.

Metal

·         1st coat - Universal Floor Master Epoxy Food Grade Primer.

·         Allow 4 hours drying time.

·         2nd – 3rd – Universal Floor Master Epoxy Food Grade Topcoat.

·         Allow 8 hours intercoat interval.